Micropur Forte MF 1000F / 100ml

• Micropur Forte disinfects clear tap water and keeps it germ-free for up to 6 months.
• 1 ml per 10 L, enough for 1000 L
• The oxidizing effect of chlorine eliminates not only bacteria but also viruses and most protozoa and fungi.
• Micropur Forte can be used wherever microbiologically unsafe tap water needs to be disinfected for drinking, cooking or washing. It is also an ideal preservative for water in water tanks, water baths, cooling circuits, heating circuits, humidifiers, cisterns, incubators and more.
• For clear, not cloudy water, as suspended matter can impair the effect of chlorine and silver ions. If the water is cloudy, use a Katadyn filter.
• Contains chlorine > disinfects tap water
• With silver ions > preserves water for up to 6 months
• Small packaging > fits everywhere

Dose Micropur Forte liquid into the empty or half-filled water container (only clear water). Immediately fill the container with the desired amount of water. The resulting turbulence serves to mix Micropur Forte and water. Additional stirring is not necessary. If Micropur Forte is only added after the container has been filled, the water must be stirred so that the active ingredients are evenly distributed. Wait for the reaction time (30 to 120 minutes).

• If the water is very cold or if Giardia cysts are suspected, only drink the water after allowing it to soak for 2 hours.
• The limit value of silver in drinking water is 0.1 mg/l and will not be exceeded after the exposure time of Micropur Forte.
• With Micropur Antichlor the slight taste of chlorine can be neutralized within 3 minutes.

Technical data sheet

Safety data sheet